Low Voltage Trip Attachment for Miniature Circuit Breakers

• Customization: Available
• Breaking Capacity: Low Voltage Circuit Breakers
• Operation: Manual Type
• Model NO.: Under voltage release
• Speed: High-Speed Circuit Breaker
• Arc-extinguishing Medium: Arc Chamber
• Installation: Fixed
• Structure: MCB
• Poles Number: 1
• Type: Circuit Breaker
• Function: Shunt Release
• Certification: ISO9001-2000
• Shell Material: PA66 Unflaming Material
• Transport Package: Carton
• Specification: 18mm
• Trademark: CDADA, OEM, ODM
• Origin: Shanghai
• HS Code: 85362000
• Production Capacity: 100000PCS/Month

Product Description

Shunt release


Introduction

Rated control source voltage(Us)of DAB7-FL shunt release is AC50Hz and 24V to 110V, 110V to 400V,DC 24V to 60V, 110V to 220V, when the applied current voltage is from 70% Us to 110% Us, the shunt release will act reliably and break the circuit breaker.

Installation and Use
1. This series of circuit breaker accessories are specially designed for use in conjnction with DAB7 (63 frame) circuit breakers and are not intended to be used alone.

The circuit breaker has the following accessories
Circuit breaker + auxiliary contact; circuit breaker + auxiliary alarm contact; circuit breaker +shunt trip;
circuit breaker + shunt trip + auxiliary contact; circuit breaker + shunt trip + auxiliary alarm contact; circuit breaker + undervoltage trip.

2. The four accessories are installed on the left side of DAB7-63 miniature circuit breakers, the DAB7-OF, DAB7-FB, DAB7-QY are fixed with screws, the DAB7-FL is fixed to both sides with tape, and at the same time can be installed with the guide rail.
3. The mechanical connection between the circuit breaker and DAB7-, DAB7- FB, DAB7- FL, DAB7-QY transmission shaft should be flexible and compatible with the rest of the equipment.
4. After DAB7-QY circuit breaker has been installed, it can only be closed when press the test button. And installer should shut off the circuit breaker and release the test button immediately, thus ensure the installation safely and correctly. Besides, the rated voltage should pass through the undervoltage trip at same time.